» DC Modular Family » Battery Protect Relay (500A)
Battery Protect Relay (500A)
(art.no. 5074410 & 5074420)
Back to DC Modular Family
The DC Modular Battery Protect Relay (TBP) has the same capabilities as the Remote Battery Switch (RBS). It is a smart high current magnetic latching contactor, that can handle continuous DC currents of up to 500Amps. Whereas the RBS is mainly used as a locally or externally controlled battery load switch, the TBP has a number of additional features. Most importantly, it can protect your battery without the need of an external measurement and control device.
Besides controlling the TBP remotely, buttons positioned at the top also provide a way to open or close the main contact locally. For external control, the TBP is equipped with a 5 wire interface cable. It can be configured to accept two wire or single wire ON/OFF commands for optimal flexibility.
The TBP is a magnetic latching relay, which means that there is no current draw from the battery when the contact is closed. This is a great benefit compared to regular relays which do require a (sometimes significant-) hold current to keep the contact closed.
Besides all features and benefits of the RBS, the TBP has battery protection built in. It will automatically open the main contact once the battery voltage has dropped below a programmable low voltage level. When subsequently the battery voltage has risen above the programmable reconnect voltage, the main contact is closed again.
Another handy TBP feature is the Override mode. In situations where the TBP has opened the main contact due to a battery under voltage, long-pressing the close button (local or external) will close the main contact for 1 minute. This allows the user to jumpstart a low battery system. When after this minute the battery voltage remains too low, the contact will open up again. But it remains closed when during the override time, a charger has been connected causing the battery voltage to recover.
The PSC2000-12-80, PSC2500-24-50, PSC3000-12-120 and PSC3500-24-70 are compact all in one combinations of a true sinewave inverter, a powerful battery charger and an automatic transfer switch. An ideal power station solution for Caravan, RV, Marine or off-grid solar applications.
This 500A Battery Protect Relay has the same capabilities as our Remote Battery Switch (500A) but adds battery protection using precise programmable disconnect- and reconnect voltages. […]
07 Oct 2020
The Omnicharge DC battery chargers are primarily intended to charge an auxiliary or service battery from a vehicle starter battery. The input battery voltage can […]
17 Jun 2020
© - TBS Electronics